The external walls are produce from separate panels with different dimensions. Each panel consist of wooden frame with cross section of the beams 132 x 62 mm. We have to inform that our equipment can produce maximum cross section of 160 mm. The height of the walls depends of the requirements of the customer. Usually the height is min 260 cm. After that the wooden frame is filled with thermo insulating material (mineral or stone wadding URSA/ROCKWOOL) with thickness 120 mm. It increases the head and sound insulation of the panel. Both sides are closed with OSB boards with thickness 11 mm. Every element glues on each corner and fix with screws only. On every corner of the house we put the panel with cross section connection inside to protect damage the house during the earthquake.  All panels we prepare in the factory and after that we transfer to the construction site. These make assemblage easy and decrease the time of assembling. The outside parts of the external walls we can finish with cellular insulation (min 50 mm ASTROTERM or ROCKWOOL), glass scrims and polymer/silicate plaster. The other way for finishing is with cladding from PVC or wood. All wooden parts are prefabricated treatment with liquid against termites and are water resistance. All connections between the elements are carried out using rivets, screws and bolts. The internal surfaces of the walls have always vapour barrier (1 mm) and can be covered with gypsum wallboard (KNAUF) and latex or wallpaper, or PVC profiles (DUMAPLAST) for the kitchen and bathrooms. The wooden partition can use when we want to change the design in one room. The wooden partition can be cover with oils instead of varnish which is more ecological way.  The faience tiles can put on wall in bathrooms too..

The internal walls are smaller than external and usually are with beam with section of 92 x 42mm  The height is the same as external walls. We also fill them with isolation material like external ones. Additional if clients prefer we can put sound isolation around the bedrooms. Both sides are closed with OSB boards with thickness 11 mm. The most order way is with gypsum boards and latex and ceramic tiles in bathrooms and utility room. The PVC profiles (DECEUNINCK) are suitable for kitchen and bathrooms. The wooden partition can use when we want to change the design in one room.